Acri-Soy Penetrating Clear Soy Sealer

Enlarge Image
Item # 1980

Interior/Exterior Penetrating Clear Sealer

A bio-based penetrating clear sealer that is formulated from advanced chemical technology utilizing soybean oils. Soy ester chemistry has an inherent ability to effectively penetrate and protect porous substrate surfaces by creating a molecular bond and seal.



Choose Product Features

Size:    
Sheen:    
Price: To see our low price, add this item to your cart. This does not obligate you to buy this item. Quantity:
Calculate Shipping

This advanced formulation outperforms typical water-based sealers and provides long lasting protection against moisture, efflorescence, dusting, marring, and stains. The higher spread rate and effective penetration is due to the patented soy ester formulation that won't evaporate before getting into the pores of the substrate.

When used as a finish sealer, it is the only sealer recommended for the ECO ProCoteTM brand of concrete and wood stains.

Recommend For:

Green Building, air quality and environmentally compliant interior or exterior applications. Use where a safe premium quality sealer is desired. It is a required lock-in protective sealer for all ECO ProCoteTM concrete and wood stain products. Effectivley used for porous surfaces such as:

  • Concrete
  • Wood
  • Masonry
  • Fiber Board
  • Brick Walls
  • Polyfoam
  • Brick Pavers
  • Natural Stone
  • Stucco
  • Unpolished Tile
  • Drywall
  • Decorative Art
  • Rammed Earth
  • And More...



 

 

  • Bio-Based Soy Technology
  • Non-Toxic, Non Flammable
  • Very Low VOC
  • Virtually Odorless
  • Penetrating Sealer
  • Protective Sealer
  • Does Not Alter Surface Friction
  • Clear Finish
  • Water Resistant
  • Stain Resistant
  • Mar Resistant
  • Safe, Easy, High Spread Application

Application Data:

Make sure all surfaces and stains have properly cured per manufacturer instructions. All surfaces must be dry and free of grease, oils, wax, dirt, contaminants, etc., prior to sealer application. Apply material to a dry surface using a brush, pad, 3/8 nap roller or low-pressure spray in a thin even coat. Back-roll or wipe where necessary to avoid puddles. One coat application is generally sufficient depending on surface porosity and temperature. If additional coats are required, allow a 1 to 2 hour inter-coat dry time, then apply coat as desired.

Reseal your surface every 2 to 3 years or as needed to prolong the life and beauty of your substrate finish.

Technical Data:

Read all instructions carefully.

Color: Milky White (dries clear)
VOC: <25 g/l
Odor: Low, Soy Ester
Shelf Life: 1 year
Coverage: 400-600 sq.ft./gal approximate
Temperature: 40F min to 120F max
Relative Humidity: 85% max, below 80% for best results.
Dry to Touch: 1 hour approximate
To Top Coat, if desired: 1 to 2 hours
To Full Cure: 2 4 hours to 5 days

For the MSDS click here:          For the Installation Guide click here:

For the Techinical Data Sheet click here:

There are no customer reviews for this product.