DynoSeal Driveway/Asphalt Sealer is a low odor elastomeric sealer and topcoating for asphalt surfaces. It helps to reduce the offgassing and offensive smells generated by new asphalt, while preserving and renewing existing asphalt surfaces.
Use On: DynoSeal Driveway/Asphalt Sealer can be used on unsealed or previously sealed asphalt surfaces. It can also be mixed with sand to make an asphalt driveway patch for small areas.
Coverage:One gallon of DynoSeal Driveway/Asphalt Sealer covers approximately 100-600 square feet per gallon depending on dilution and surface condition (porosity). Coating that has been mixed 1:1 with sand will normally coat about 15-50 square feet per gallon.
Drying / Curing Time:Under normal conditions, DynoSeal Driveway/Asphalt Sealer dries within 2-4 hours. Material appears brown/gray during application and is black when dry. If coating remains tacky after 24 hours, mix 1 part sand, 1 part water, 1 part DynoSeal Driveway Sealer and coat surface again. Coating should dry without any serious tackiness.
- Low odor elastomeric
- Reduces offensive smell of new asphalt
- Renews existing asphalt surfaces
For the MSDS click here: 
For the Product Data Sheet click here:
There are no customer reviews for this product.
Shopping Cart: Empty 
