Safecoat MexeSeal is a low odor, waterbased, medium gloss clear sealer. It is suitable for use on porous interior tile or masonry surfaces where oil and water repellency are desired. It is ideal for long term protection against food, oil and water stains on residential or commercial floors.
Safecoat MexeSeal is non-hazardous and non-flammable - a total replacement for high solvent content systems.
Use On: Unpolished marble, limestone, granite, sandstone, slate, fireclay (brick, tile, terra cotta, pavers), concrete (brick, tile, precast panels, cast in place).
Always test in small, inconspicuous places before full application. Safecoat MexeSeal is generally not suited for polished surfaces; test first. MexeSeal is also effective as a sealer and protectant for porous wood surfaces such as redwood, cedar and pine.
Coverage: One gallon of Safecoat MexeSeal covers approximately 300 square feet in one coat depending on surface porosity.
Drying/Curing Time: Under normal conditions, Safecoat MexeSeal dries to touch in one hour, is recoatable after two hours and may be opened to traffic after 8-24 hours, depending upon conditions. Normal conditions include a clean, dry surface, access to fresh air flow, a dust free environment, moderate humidity, and temperatures above 55 degrees F. Thick application, high humidity or conditions other than normal will cause Safecoat MexeSeal to dry and cure more slowly.
For the MSDS click here: 
For the Product Data Sheet click here:
Shopping Cart: Empty 
